Kawamoto Pump Mfg. Co., Ltd.

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Unit conversion calculator

NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.

Capacity: Q

U.S.GPM → m³/min
m³/min → U.S.GPM
→

Total head: H

feet → m
m → feet
→

UF2

Total head(m)

Capacity(L/min)

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Convert to [U.S.GPM, ft.]

UF2

Capacity for low flow stop: 4L/min

Bore	Well dia. of application	Set Model	Set component: Automatic operation unit	Set component: Model name of application pump	Motor	Power source	Stages	Q	H	operation characteristics, Underground head	operation characteristics, Operation head	operation characteristics, Capacity *	operation characteristics, Starting head	CAD Download
mm	mm	―	―	―	W	V	―	L/min	m	m	m	L/min	m	―
25	100	UF2-450S	UF2-450S	US2-456T	450	Single phase 100V	7	32	40	30〈20〉［10］	14〈24〉［34］	27	10〈20〉［30］	DL
25	100	UF2-450T	UF2-450T	US2-456T	450	Three phase 200V	7	32	40	30〈20〉［10］	14〈24〉［34］	27	10〈20〉［30］	DL
25	100	UF2-600S	UF2-600S	US2-606T	600	Single phase 100V	8	38	47	35〈25〉［15］	16〈26〉［36］	31	12〈22〉［32］	DL
25	100	UF2-600S2	UF2-600S2	US2-606T	600	Single phase 200V	8	38	47	35〈25〉［15］	16〈26〉［36］	31	12〈22〉［32］	DL
25	100	UF2-600T	UF2-600T	US2-606T	600	Three phase 200V	8	38	47	35〈25〉［15］	16〈26〉［36］	31	12〈22〉［32］	DL
25	100	UFH2-600S	UF2-600S	USＨ2-606T	600	Single phase 100V	10	24	62	50〈40〉［30］	16〈26〉［36］	20	12〈22〉［32］	DL
25	100	UFH2-600S2	UF2-600S2	USＨ2-606T	600	Single phase 200V	10	24	62	50〈40〉［30］	16〈26〉［36］	20	12〈22〉［32］	DL
25	100	UFH2-600T	UF2-600T	USＨ2-606T	600	Three phase 200V	10	24	62	50〈40〉［30］	16〈26〉［36］	20	12〈22〉［32］	DL
25	100	UF2-900S2	UF2-900S2	US2-906	900	Single phase 200V	12	45	66	50〈40〉［30］	20〈30〉［40］	42	16〈26〉［36］	DL
25	100	UF2-900	UF2-900	US2-906	900	Three phase 200V	12	45	66	50〈40〉［30］	20〈30〉［40］	42	16〈26〉［36］	DL
25	100	UF2-1100S2	UF2-1100S2	US2-1106	1100	Single phase 200V	12	43	81	60〈50〉［40］	25〈35〉［45］	42	21〈31［〉41］	DL
25	100	UF2-1100	UF2-1100	US2-1106	1100	Three phase 200V	12	43	81	60〈50〉［40］	25〈35〉［45］	42	21〈31［〉41］	DL

Values enclosed in ( ) are for single phase 200V model. *Operation characteristics enclosed in < > shows the value when Fine sensor set at M, and [ ] shows the value when Fine sensor set at H.

* Reference

Convert to [㎥/min, m]

UF2

Capacity for low flow stop: 4L/min

Bore	Well dia. of application	Set Model	Set component: Automatic operation unit	Set component: Model name of application pump	Motor	Power source	Stages	Q	H	operation characteristics, Underground head	operation characteristics, Operation head	operation characteristics, Capacity *	operation characteristics, Starting head	CAD Download
mm	mm	―	―	―	W	V	―	U.S.GPM	ft.	ft.	ft.	U.S.GPM	ft.	―
25	100	UF2-450S	UF2-450S	US2-456T	450	Single phase 100V	7	8	131	30〈20〉［10］	14〈24〉［34］	7	10〈20〉［30］	DL
25	100	UF2-450T	UF2-450T	US2-456T	450	Three phase 200V	7	8	131	30〈20〉［10］	14〈24〉［34］	7	10〈20〉［30］	DL
25	100	UF2-600S	UF2-600S	US2-606T	600	Single phase 100V	8	10	154	35〈25〉［15］	16〈26〉［36］	8	12〈22〉［32］	DL
25	100	UF2-600S2	UF2-600S2	US2-606T	600	Single phase 200V	8	10	154	35〈25〉［15］	16〈26〉［36］	8	12〈22〉［32］	DL
25	100	UF2-600T	UF2-600T	US2-606T	600	Three phase 200V	8	10	154	35〈25〉［15］	16〈26〉［36］	8	12〈22〉［32］	DL
25	100	UFH2-600S	UF2-600S	USＨ2-606T	600	Single phase 100V	10	6	203	50〈40〉［30］	16〈26〉［36］	5	12〈22〉［32］	DL
25	100	UFH2-600S2	UF2-600S2	USＨ2-606T	600	Single phase 200V	10	6	203	50〈40〉［30］	16〈26〉［36］	5	12〈22〉［32］	DL
25	100	UFH2-600T	UF2-600T	USＨ2-606T	600	Three phase 200V	10	6	203	50〈40〉［30］	16〈26〉［36］	5	12〈22〉［32］	DL
25	100	UF2-900S2	UF2-900S2	US2-906	900	Single phase 200V	12	11	216	50〈40〉［30］	20〈30〉［40］	11	16〈26〉［36］	DL
25	100	UF2-900	UF2-900	US2-906	900	Three phase 200V	12	11	216	50〈40〉［30］	20〈30〉［40］	11	16〈26〉［36］	DL
25	100	UF2-1100S2	UF2-1100S2	US2-1106	1100	Single phase 200V	12	11	265	60〈50〉［40］	25〈35〉［45］	11	21〈31［〉41］	DL
25	100	UF2-1100	UF2-1100	US2-1106	1100	Three phase 200V	12	11	265	60〈50〉［40］	25〈35〉［45］	11	21〈31［〉41］	DL

Values enclosed in ( ) are for single phase 200V model. *Operation characteristics enclosed in < > shows the value when Fine sensor set at M, and [ ] shows the value when Fine sensor set at H.

* Reference

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Unit conversion calculator

NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.

Capacity: Q

U.S.GPM → m³/min
m³/min → U.S.GPM
→

Total head: H

feet → m
m → feet
→

UFL2

Total head(m)

Capacity(L/min)

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Convert to [U.S.GPM, ft.]

UFL2

Capacity for low flow stop: 4L/min

Bore	Well dia. of application	Set Model	Motor	Power source	Stages	Q	H	operation characteristics, Underground head	operation characteristics, Operation head	operation characteristics, Capacity *	operation characteristics, Starting head	CAD Download
mm	mm	―	W	V	―	L/min	m	m	m	L/min	m	―
32	100	UFL2-450S	450	Single phase 100V	4	72	22	12〈6〉	14〈20〉	53	10〈16〉	DL
32	100	UFL2-450T	450	Three phase 200V	4	72	22	12〈6〉	14〈20〉	53	10〈16〉	DL
32	100	UFL2-600S	600	Single phase 100V	5	85	24	12〈6〉	16〈22〉	73	12〈18〉	DL
32	100	UFL2-600S2	600	Single phase 200V	5	85	24	12〈6〉	16〈22〉	73	12〈18〉	DL
32	100	UFL2-600T	600	Three phase 200V	5	85	24	12〈6〉	16〈22〉	73	12〈18〉	DL
32	100	UFL2-900	900	Three phase 200V	8	100	32	18〈12〉	18〈24〉	95	14〈20〉	DL
32	100	UFL2-900S2	900	Single phase 200V	8	100	32	18〈12〉	18〈24〉	95	14〈20〉	DL
32	100	UFL2-1100	1100	Three phase 200V	8	100	41	24〈18〉	21〈27〉	95	17〈23〉	DL
32	100	UFL2-1100S2	1100	Single phase 200V	8	100	41	24〈18〉	21〈27〉	95	17〈23〉	DL

* Reference

Bore	Well dia. of application	Set Model	Motor	Power source	Stages	Q	H	operation characteristics, Underground head	operation characteristics, Operation head	operation characteristics, Capacity *	operation characteristics, Starting head	CAD Download
mm	mm	―	W	V	―	U.S.GPM	ft.	ft.	ft.	U.S.GPM	ft.	―
32	100	UFL2-450S	450	Single phase 100V	4	19	72	12〈6〉	14〈20〉	14	10〈16〉	DL
32	100	UFL2-450T	450	Three phase 200V	4	19	72	12〈6〉	14〈20〉	14	10〈16〉	DL
32	100	UFL2-600S	600	Single phase 100V	5	22	78	12〈6〉	16〈22〉	19	12〈18〉	DL
32	100	UFL2-600S2	600	Single phase 200V	5	22	78	12〈6〉	16〈22〉	19	12〈18〉	DL
32	100	UFL2-600T	600	Three phase 200V	5	22	78	12〈6〉	16〈22〉	19	12〈18〉	DL
32	100	UFL2-900	900	Three phase 200V	8	26	104	18〈12〉	18〈24〉	25	14〈20〉	DL
32	100	UFL2-900S2	900	Single phase 200V	8	26	104	18〈12〉	18〈24〉	25	14〈20〉	DL
32	100	UFL2-1100	1100	Three phase 200V	8	26	134	24〈18〉	21〈27〉	25	17〈23〉	DL
32	100	UFL2-1100S2	1100	Single phase 200V	8	26	134	24〈18〉	21〈27〉	25	17〈23〉	DL

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Unit conversion calculator

NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.

Capacity: Q

U.S.GPM → m³/min
m³/min → U.S.GPM
→

Total head: H

feet → m
m → feet
→

UF2T

Total head(m)

Capacity(L/min)

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Convert to [U.S.GPM, ft.]

UF2T

Capacity for low flow stop: 4L/min

Bore	Set Model	Motor	Power source	Stages	Q	H	operation characteristics, Operation head	operation characteristics, Capacity *	operation characteristics, Starting head	CAD Download	CAD Download	CAD Download	CAD Download
mm	―	W	V	―	L/min	m	m	L/min	m	300L	300L(mounter)	500L	500L(mounter)
25	UF2T-450S	450	Single phase 100V	7	32	41	45(35)	26	41(31)	DL	DL	DL	DL
25	UF2T-450T	450	Three phase 200V	7	32	41	45(35)	26	41(31)	DL	DL	DL	DL
25	UF2T-600S	600	Single phase 100V	8	48	41	45(35)	42	41(31)	DL	DL	DL	DL
25	UF2T-600T	600	Three phase 200V	8	48	41	45(35)	42	41(31)	DL	DL	DL	DL

Value enclosed in ( ) shows the specification when head is set at low (fine sensor set at L).

* Reference

UF/UFL/UFT

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

Unit conversion calculator

Capacity: Q

Total head: H

UF2

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

UF2

UF2

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

Unit conversion calculator

Capacity: Q

Total head: H

UFL2

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

UFL2

UFL2

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

Unit conversion calculator

Capacity: Q

Total head: H

UF2T

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

UF2T

UF2T