Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.
For shallow well
Discharge head(m)
Capacity(L/min)
Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.
50Hz
For shallow well, in case -8m total suction head (-6m in Alternate/Parallel operation)
Capacity for low flow stop: 4L/min
20 | Individual | NF3-150S | 150 | Single phase 100V | 20 | 19 | 16 | 16 | 12 | 18 | 1 | 24 | 36~40 | DL |
25 | Individual | NF3-250S | 250 | Single phase 100V | 22 | 28 | 18 | 25 | 14 | 22 | 1 | 35 | 39~45 | DL |
25 | Individual | NF3-400S | 400 | Single phase 100V | 25 | 38 | 21 | 31 | 17 | 26 | 1 | 47 | 42~49 | DL |
25 | Individual | NF3-400S2 | 400 | Single phase 200V | 25 | 38 | 21 | 31 | 17 | 26 | 1 | 47 | 42~49 | DL |
25 | Individual | NF3-400T | 400 | Three phase 200V | 25 | 38 | 21 | 31 | 17 | 26 | 1 | 47 | 42~49 | DL |
32 | Individual | NF3-750S2 | 750 | Single phase 200V | 28 | 55 | 24 | 48 | 20 | 29.5 | 1 | 72 | 45~52 | DL |
32 | Individual | NF3-750 | 750 | Three phase 200V | 28 | 55 | 24 | 48 | 20 | 29.5 | 1 | 72 | 45~52 | DL |
32 | Alternate | NF3-400SH-A | 400 | Single phase 100V | 25 | 35 | 23 | 32 | 19 | ― | 1X2 | 46 | 46~50 | DL |
32 | Alternate | NF3-400S2H-A | 400 | Single phase 200V | 25 | 35 | 23 | 32 | 19 | ― | 1X2 | 46 | 46~50 | ― |
32 | Alternate | NF3-400TH-A | 400 | Three phase 200V | 25 | 35 | 23 | 32 | 19 | ― | 1X2 | 46 | 46~50 | DL |
32 | Alternate | NF3-750S2H-A | 750 | Single phase 200V | 28 | 54 | 26 | 50 | 22 | ― | 1X2 | 70 | 53.5~56 | ― |
32 | Alternate | NF3-750H-A | 750 | Three phase 200V | 28 | 54 | 26 | 50 | 22 | ― | 1X2 | 70 | 53.5~56 | DL |
32 | Alternate & Parallel | NF3-400SH-P | 400X2 | Single phase 100V | 25 | 70 | 23 | 64 | 19 | ― | 1X2 | 92 | 46~53 | DL |
32 | Alternate & Parallel | NF3-400S2H-P | 400X2 | Single phase 200V | 25 | 70 | 23 | 64 | 19 | ― | 1X2 | 92 | 46~53 | ― |
32 | Alternate & Parallel | NF3-400TH-P | 400X2 | Three phase 200V | 25 | 70 | 23 | 64 | 19 | ― | 1X2 | 92 | 46~53 | DL |
32 | Alternate & Parallel | NF3-750S2H-P | 750X2 | Single phase 200V | 28 | 108 | 26 | 100 | 22 | ― | 1X2 | 140 | 53.5~58 | ― |
32 | Alternate & Parallel | NF3-750H-P | 750X2 | Three phase 200V | 28 | 108 | 26 | 100 | 22 | ― | 1X2 | 140 | 53.5~58 | DL |
32 | Individual | NFK2-750 | 750 | Three phase 200V | 36 | 40 | 32 | 33 | 28 | ― | 1 | 60 | 45~52 | ― |
32 | Alternate | NFK2-750H-A | 750 | Three phase 200V | 36 | 38 | 34 | 36 | 30 | ― | 1X2 | 57 | 54~56.5 | DL |
32 | Alternate & Parallel | NFK2-750H-P | 750X2 | Three phase 200V | 36 | 76 | 34 | 72 | 30 | − | 1X2 | 114 | 54~59 | DL |
*1 Starting head of individual operation model is set for shallow well (-8m total suction head), and alternate/parallel operation is set for reservoir tank (-2m total suction head).
When using, adjust starting pressure setting according to applications.
*2 Operation head (reference) at 10L/min discharge. Operation head may vary according to the capacity in S mode.
NOTE) Operation head is not constant in S mode. Power consumption may increase at small capacity operation compare with E mode. *E mode is set as default.
For shallow well, in case -8m total suction head (-6m in Alternate/Parallel operation)
Capacity for low flow stop: 4L/min
20 | Individual | NF3-150S | 150 | Single phase 100V | 65 | 5 | 4 | 52 | 3 | 4 | 1 | 6 | 36~40 | DL |
25 | Individual | NF3-250S | 250 | Single phase 100V | 72 | 7 | 4 | 82 | 3 | 5 | 1 | 9 | 39~45 | DL |
25 | Individual | NF3-400S | 400 | Single phase 100V | 82 | 10 | 5 | 101 | 4 | 6 | 1 | 12 | 42~49 | DL |
25 | Individual | NF3-400S2 | 400 | Single phase 200V | 82 | 10 | 5 | 101 | 4 | 6 | 1 | 12 | 42~49 | DL |
25 | Individual | NF3-400T | 400 | Three phase 200V | 82 | 10 | 5 | 101 | 4 | 6 | 1 | 12 | 42~49 | DL |
32 | Individual | NF3-750S2 | 750 | Single phase 200V | 91 | 14 | 6 | 157 | 5 | 7 | 1 | 19 | 45~52 | DL |
32 | Individual | NF3-750 | 750 | Three phase 200V | 91 | 14 | 6 | 157 | 5 | 7 | 1 | 19 | 45~52 | DL |
32 | Alternate | NF3-400SH-A | 400 | Single phase 100V | 82 | 9 | 6 | 104 | 5 | ― | 1X2 | 12 | 46~50 | DL |
32 | Alternate | NF3-400S2H-A | 400 | Single phase 200V | 82 | 9 | 6 | 104 | 5 | ― | 1X2 | 12 | 46~50 | ― |
32 | Alternate | NF3-400TH-A | 400 | Three phase 200V | 82 | 9 | 6 | 104 | 5 | ― | 1X2 | 12 | 46~50 | DL |
32 | Alternate | NF3-750S2H-A | 750 | Single phase 200V | 91 | 14 | 6 | 164 | 5 | ― | 1X2 | 18 | 53.5~56 | ― |
32 | Alternate | NF3-750H-A | 750 | Three phase 200V | 91 | 14 | 6 | 164 | 5 | ― | 1X2 | 18 | 53.5~56 | DL |
32 | Alternate & Parallel | NF3-400SH-P | 400X2 | Single phase 100V | 82 | 18 | 6 | 209 | 5 | ― | 1X2 | 24 | 46~53 | DL |
32 | Alternate & Parallel | NF3-400S2H-P | 400X2 | Single phase 200V | 82 | 18 | 6 | 209 | 5 | ― | 1X2 | 24 | 46~53 | ― |
32 | Alternate & Parallel | NF3-400TH-P | 400X2 | Three phase 200V | 82 | 18 | 6 | 209 | 5 | ― | 1X2 | 24 | 46~53 | DL |
32 | Alternate & Parallel | NF3-750S2H-P | 750X2 | Single phase 200V | 91 | 28 | 6 | 328 | 5 | ― | 1X2 | 36 | 53.5~58 | ― |
32 | Alternate & Parallel | NF3-750H-P | 750X2 | Three phase 200V | 91 | 28 | 6 | 328 | 5 | ― | 1X2 | 36 | 53.5~58 | DL |
32 | Individual | NFK2-750 | 750 | Three phase 200V | 118 | 10 | 8 | 108 | 7 | ― | 1 | 15 | 45~52 | ― |
32 | Alternate | NFK2-750H-A | 750 | Three phase 200V | 118 | 10 | 8 | 118 | 7 | ― | 1X2 | 15 | 54~56.5 | DL |
32 | Alternate & Parallel | NFK2-750H-P | 750X2 | Three phase 200V | 118 | 20 | 8 | 236 | 7 | − | 1X2 | 30 | 54~59 | DL |
*1 Starting head of individual operation model is set for shallow well (-8m total suction head), and alternate/parallel operation is set for reservoir tank (-2m total suction head).
When using, adjust starting pressure setting according to applications.
*2 Operation head (reference) at 10L/min discharge. Operation head may vary according to the capacity in S mode.
NOTE) Operation head is not constant in S mode. Power consumption may increase at small capacity operation compare with E mode. *E mode is set as default.
Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.
For reservoir
Discharge head(m)
Capacity(L/min)
Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.
50Hz
For reservoir (in case total suction head: -2m)
Capacity for low flow stop: 4L/min
20 | Individual | NF3-150S | 150 | Single phase 100V | 20 | 19 | 22 | 16 | 18 | 24 | 1 | 24 | 36~40 |
25 | Individual | NF3-250S | 250 | Single phase 100V | 22 | 28 | 24 | 25 | 20 | 28 | 1 | 35 | 39~45 |
25 | Individual | NF3-400S | 400 | Single phase 100V | 25 | 38 | 27 | 31 | 23 | 32 | 1 | 47 | 42~49 |
25 | Individual | NF3-400S2 | 400 | Single phase 200V | 25 | 38 | 27 | 31 | 23 | 32 | 1 | 47 | 42~49 |
25 | Individual | NF3-400T | 400 | Three phase 200V | 25 | 38 | 27 | 31 | 23 | 32 | 1 | 47 | 42~49 |
32 | Individual | NF3-750S2 | 750 | Single phase 200V | 28 | 55 | 30 | 48 | 26 | 35.5 | 1 | 72 | 45~52 |
32 | Individual | NF3-750 | 750 | Three phase 200V | 28 | 55 | 30 | 48 | 26 | 35.5 | 1 | 72 | 45~52 |
32 | Alternate | NF3-400SH-A | 400 | Single phase 100V | 25 | 35 | 27 | 32 | 23 | ― | 1X2 | 46 | 46~50 |
32 | Alternate | NF3-400S2H-A | 400 | Single phase 200V | 25 | 35 | 27 | 32 | 23 | ― | 1X2 | 46 | 46~50 |
32 | Alternate | NF3-400TH-A | 400 | Three phase 200V | 25 | 35 | 27 | 32 | 23 | ― | 1X2 | 46 | 46~50 |
32 | Alternate | NF3-750S2H-A | 750 | Single phase 200V | 28 | 54 | 30 | 50 | 26 | ― | 1X2 | 70 | 53.5~56 |
32 | Alternate | NF3-750H-A | 750 | Three phase 200V | 28 | 54 | 30 | 50 | 26 | ― | 1X2 | 70 | 53.5~56 |
32 | Alternate & Parallel | NF3-400SH-P | 400X2 | Single phase 100V | 25 | 70 | 27 | 64 | 23 | ― | 1X2 | 92 | 46~53 |
32 | Alternate & Parallel | NF3-400S2H-P | 400X2 | Single phase 200V | 25 | 70 | 27 | 64 | 23 | ― | 1X2 | 92 | 46~53 |
32 | Alternate & Parallel | NF3-400TH-P | 400X2 | Three phase 200V | 25 | 70 | 27 | 64 | 23 | ― | 1X2 | 92 | 46~53 |
32 | Alternate & Parallel | NF3-750S2H-P | 750X2 | Single phase 200V | 28 | 108 | 30 | 100 | 26 | ― | 1X2 | 140 | 53.5~58 |
32 | Alternate & Parallel | NF3-750H-P | 750X2 | Three phase 200V | 28 | 108 | 30 | 100 | 26 | ― | 1X2 | 140 | 53.5~58 |
32 | Individual | NFK2-750 | 750 | Three phase 200V | 36 | 40 | 38 | 33 | 34 | ― | 1 | 60 | 45~52 |
32 | Alternate | NFK2-750H-A | 750 | Three phase 200V | 36 | 38 | 38 | 36 | 34 | ― | 1X2 | 57 | 54~56.5 |
32 | Alternate & Parallel | NFK2-750H-P | 750X2 | Three phase 200V | 36 | 76 | 38 | 72 | 34 | ― | 1X2 | 114 | 54~59 |
*1 Starting head of individual operation model is set for shallow well (-8m total suction head), and alternate/parallel operation is set for reservoir tank (-2m total suction head).
When using, adjust starting pressure setting according to applications.
*2 Operation head (reference) at 10L/min discharge. Operation head may vary according to the capacity in S mode.
NOTE) Operation head is not constant in S mode. Power consumption may increase at small capacity operation compare with E mode. *E mode is set as default.
For reservoir (in case total suction head: -2m)
Capacity for low flow stop: 4L/min
20 | Individual | NF3-150S | 150 | Single phase 100V | 65 | 5 | 5 | 52 | 4 | 6 | 1 | 6 | 36~40 |
25 | Individual | NF3-250S | 250 | Single phase 100V | 72 | 7 | 6 | 82 | 5 | 7 | 1 | 9 | 39~45 |
25 | Individual | NF3-400S | 400 | Single phase 100V | 82 | 10 | 7 | 101 | 6 | 8 | 1 | 12 | 42~49 |
25 | Individual | NF3-400S2 | 400 | Single phase 200V | 82 | 10 | 7 | 101 | 6 | 8 | 1 | 12 | 42~49 |
25 | Individual | NF3-400T | 400 | Three phase 200V | 82 | 10 | 7 | 101 | 6 | 8 | 1 | 12 | 42~49 |
32 | Individual | NF3-750S2 | 750 | Single phase 200V | 91 | 14 | 7 | 157 | 6 | 9 | 1 | 19 | 45~52 |
32 | Individual | NF3-750 | 750 | Three phase 200V | 91 | 14 | 7 | 157 | 6 | 9 | 1 | 19 | 45~52 |
32 | Alternate | NF3-400SH-A | 400 | Single phase 100V | 82 | 9 | 7 | 104 | 6 | ― | 1X2 | 12 | 46~50 |
32 | Alternate | NF3-400S2H-A | 400 | Single phase 200V | 82 | 9 | 7 | 104 | 6 | ― | 1X2 | 12 | 46~50 |
32 | Alternate | NF3-400TH-A | 400 | Three phase 200V | 82 | 9 | 7 | 104 | 6 | ― | 1X2 | 12 | 46~50 |
32 | Alternate | NF3-750S2H-A | 750 | Single phase 200V | 91 | 14 | 7 | 164 | 6 | ― | 1X2 | 18 | 53.5~56 |
32 | Alternate | NF3-750H-A | 750 | Three phase 200V | 91 | 14 | 7 | 164 | 6 | ― | 1X2 | 18 | 53.5~56 |
32 | Alternate & Parallel | NF3-400SH-P | 400X2 | Single phase 100V | 82 | 18 | 7 | 209 | 6 | ― | 1X2 | 24 | 46~53 |
32 | Alternate & Parallel | NF3-400S2H-P | 400X2 | Single phase 200V | 82 | 18 | 7 | 209 | 6 | ― | 1X2 | 24 | 46~53 |
32 | Alternate & Parallel | NF3-400TH-P | 400X2 | Three phase 200V | 82 | 18 | 7 | 209 | 6 | ― | 1X2 | 24 | 46~53 |
32 | Alternate & Parallel | NF3-750S2H-P | 750X2 | Single phase 200V | 91 | 28 | 7 | 328 | 6 | ― | 1X2 | 36 | 53.5~58 |
32 | Alternate & Parallel | NF3-750H-P | 750X2 | Three phase 200V | 91 | 28 | 7 | 328 | 6 | ― | 1X2 | 36 | 53.5~58 |
32 | Individual | NFK2-750 | 750 | Three phase 200V | 118 | 10 | 10 | 108 | 8 | ― | 1 | 15 | 45~52 |
32 | Alternate | NFK2-750H-A | 750 | Three phase 200V | 118 | 10 | 10 | 118 | 8 | ― | 1X2 | 15 | 54~56.5 |
32 | Alternate & Parallel | NFK2-750H-P | 750X2 | Three phase 200V | 118 | 20 | 10 | 236 | 8 | ― | 1X2 | 30 | 54~59 |
*1 Starting head of individual operation model is set for shallow well (-8m total suction head), and alternate/parallel operation is set for reservoir tank (-2m total suction head).
When using, adjust starting pressure setting according to applications.
*2 Operation head (reference) at 10L/min discharge. Operation head may vary according to the capacity in S mode.
NOTE) Operation head is not constant in S mode. Power consumption may increase at small capacity operation compare with E mode. *E mode is set as default.