Kawamoto Pump Mfg. Co., Ltd.

Household

JF

From left
1st: Alternate type
2nd: Single type

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Unit conversion calculator

NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.

Capacity: Q

U.S.GPM → m³/min
m³/min → U.S.GPM
→

Total head: H

feet → m
m → feet
→

(in case using φ100 jet) For deep well 250~750W

Inquire about characteristics of [[φ]]75 and [[φ]]50 jet

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Convert to [U.S.GPM, ft.]

For deep well, small water amount stop rate: 4L/min, accumulator volume: 1L

Discharge bore	Model	Motor	Power source	Suction height*1	H*1	Q*1	operation characteristics, Starting head	operation characteristics, Operation head	Connection suction pipe	Connection pressure pipe	φ100 Jet well bore *2	φ100 Jet set No.*2	φ75 Jet well bore	φ75 Jet set No.	φ50 Jet well bore	φ50 Jet set No.	CAD Download
mm	―	W	V	m	m	L/min	m	m	mm	mm	mm	―	mm	―	mm	―	―
25	JF250S	250	Single phase 100V	12	26	24/24/19	14 ［20］	18 ［24］	30	30	100 (4B) or more	N20 or N30 (6~12m)	75 (3B) or more	R01（6~12m）	50 (2B) exclusive	S01 （6~18m）	DL
25	JF250S	250	Single phase 100V	18	32	16/10/14	14 ［20］	18 ［24］	30	30	100 (4B) or more	N21 or N31 (12~18m)	75 (3B) or more	R02（12~18m）	50 (2B) exclusive	S01 （6~18m）	DL
25	JF250S	250	Single phase 100V	24	38	10.5/-/-	14 ［20］	18 ［24］	30	30	100 (4B) or more	N21 or N31 (18~24m)	75 (3B) or more	―	50 (2B) exclusive	―	DL
25	JF400S JF400S2 JF400T	400	Single phase 100V (Single phase 200V), or Three phase 200V	12	29	38/30/-	17 〈23〉［29］	21 〈27〉［33］	30	30	100 (4B) or more	N20 or N30 (6~12m)	75 (3B) or more	R01（6~12m）	50 (2B) exclusive	―	DL
25	JF400S JF400S2 JF400T	400	Single phase 100V (Single phase 200V), or Three phase 200V	18	35	28/17/22	17 〈23〉［29］	21 〈27〉［33］	30	30	100 (4B) or more	N22 or N32 (12~18m)	75 (3B) or more	R02（12~18m）	50 (2B) exclusive	S01 （12~24m）	DL
25	JF400S JF400S2 JF400T	400	Single phase 100V (Single phase 200V), or Three phase 200V	24	41	17/-/16	17 〈23〉［29］	21 〈27〉［33］	30	30	100 (4B) or more	N22, N23 or N32, N33 (18~24m)	75 (3B) or more	―	50 (2B) exclusive	S01 （12~24m）	DL
25	JF400S JF400S2 JF400T	400	Single phase 100V (Single phase 200V), or Three phase 200V	30	47	11/-/-	17 〈23〉［29］	21 〈27〉［33］	30	30	100 (4B) or more	N23 or N33 (24~30m)	75 (3B) or more	―	50 (2B) exclusive	―	DL
25	JF750 JF750S2	750	Three phase (Single phase 200V)	12	32	51/32/-	20 〈26〉［32］	24 〈30〉［36］	30	30	100 (4B) or more	N20 or N30 (6~12m)	75 (3B) or more	R01（6~12m）	50 (2B) exclusive	―	DL
25	JF750 JF750S2	750	Three phase (Single phase 200V)	18	38	39/23/27	20 〈26〉［32］	24 〈30〉［36］	30	30	100 (4B) or more	N22 or N32 (12~18m)	75 (3B) or more	R01（12~18m）	50 (2B) exclusive	S01 （12~24m）	DL
25	JF750 JF750S2	750	Three phase (Single phase 200V)	24	44	29/12/21	20 〈26〉［32］	24 〈30〉［36］	30	30	100 (4B) or more	N22 or N32 (18~24m)	75 (3B) or more	R02（18~24m）	50 (2B) exclusive	S01 （12~24m）	DL
25	JF750 JF750S2	750	Three phase (Single phase 200V)	30	50	19/-/-	20 〈26〉［32］	24 〈30〉［36］	30	30	100 (4B) or more	N23 or N33 (24~30m)	75 (3B) or more	―	50 (2B) exclusive	―	DL
25	JF750 JF750S2	750	Three phase (Single phase 200V)	35	55	14.5/-/-	20 〈26〉［32］	24 〈30〉［36］	30	30	100 (4B) or more	N23 or N33 (30~35m)	75 (3B) or more	―	50 (2B) exclusive	―	DL

*Operation characteristics enclosed in < > shows the value when Fine sensor set at M, and [ ] shows the value when Fine sensor set at H. Default setting of 250W model is H, and 400W & 750W model are M.

*1 Capacity indicates the value as following array; φ100 Jet/ φ75 Jet/ φ50 Jet/

NOTE) 25mm Suction pipe and Pressure pipe in φ75 Jet, 25mm pressure pipe in φ50 Jet. According to the combining Jet, prepare different dia. joint (32 x 25)

*2 Jet set N20~N23 have built-in Foot valve.

Also, use Jet set N30~N33 in case the well water level drops under Jet part. (It is not capable of drainage in the pipe, because of foot valve without lever.)

Convert to [㎥/min, m]

For deep well, small water amount stop rate: 4L/min, accumulator volume: 1L

Discharge bore	Model	Motor	Power source	Suction height*1	H*1	Q*1	operation characteristics, Starting head	operation characteristics, Operation head	Connection suction pipe	Connection pressure pipe	φ100 Jet well bore *2	φ100 Jet set No.*2	φ75 Jet well bore	φ75 Jet set No.	φ50 Jet well bore	φ50 Jet set No.	CAD Download
mm	―	W	V	ft.	ft.	U.S.GPM	ft.	ft.	mm	mm	mm	―	mm	―	mm	―	―
25	JF250S	250	Single phase 100V	39	85	24/24/19	14 ［20］	18 ［24］	30	30	100 (4B) or more	N20 or N30 (6~12m)	75 (3B) or more	R01（6~12m）	50 (2B) exclusive	S01 （6~18m）	DL
25	JF250S	250	Single phase 100V	59	104	16/10/14	14 ［20］	18 ［24］	30	30	100 (4B) or more	N21 or N31 (12~18m)	75 (3B) or more	R02（12~18m）	50 (2B) exclusive	S01 （6~18m）	DL
25	JF250S	250	Single phase 100V	78	124	10.5/-/-	14 ［20］	18 ［24］	30	30	100 (4B) or more	N21 or N31 (18~24m)	75 (3B) or more	―	50 (2B) exclusive	―	DL
25	JF400S JF400S2 JF400T	400	Single phase 100V (Single phase 200V), or Three phase 200V	39	95	38/30/-	17 〈23〉［29］	21 〈27〉［33］	30	30	100 (4B) or more	N20 or N30 (6~12m)	75 (3B) or more	R01（6~12m）	50 (2B) exclusive	―	DL
25	JF400S JF400S2 JF400T	400	Single phase 100V (Single phase 200V), or Three phase 200V	59	114	28/17/22	17 〈23〉［29］	21 〈27〉［33］	30	30	100 (4B) or more	N22 or N32 (12~18m)	75 (3B) or more	R02（12~18m）	50 (2B) exclusive	S01 （12~24m）	DL
25	JF400S JF400S2 JF400T	400	Single phase 100V (Single phase 200V), or Three phase 200V	78	134	17/-/16	17 〈23〉［29］	21 〈27〉［33］	30	30	100 (4B) or more	N22, N23 or N32, N33 (18~24m)	75 (3B) or more	―	50 (2B) exclusive	S01 （12~24m）	DL
25	JF400S JF400S2 JF400T	400	Single phase 100V (Single phase 200V), or Three phase 200V	98	154	11/-/-	17 〈23〉［29］	21 〈27〉［33］	30	30	100 (4B) or more	N23 or N33 (24~30m)	75 (3B) or more	―	50 (2B) exclusive	―	DL
25	JF750 JF750S2	750	Three phase (Single phase 200V)	39	104	51/32/-	20 〈26〉［32］	24 〈30〉［36］	30	30	100 (4B) or more	N20 or N30 (6~12m)	75 (3B) or more	R01（6~12m）	50 (2B) exclusive	―	DL
25	JF750 JF750S2	750	Three phase (Single phase 200V)	59	124	39/23/27	20 〈26〉［32］	24 〈30〉［36］	30	30	100 (4B) or more	N22 or N32 (12~18m)	75 (3B) or more	R01（12~18m）	50 (2B) exclusive	S01 （12~24m）	DL
25	JF750 JF750S2	750	Three phase (Single phase 200V)	78	144	29/12/21	20 〈26〉［32］	24 〈30〉［36］	30	30	100 (4B) or more	N22 or N32 (18~24m)	75 (3B) or more	R02（18~24m）	50 (2B) exclusive	S01 （12~24m）	DL
25	JF750 JF750S2	750	Three phase (Single phase 200V)	98	164	19/-/-	20 〈26〉［32］	24 〈30〉［36］	30	30	100 (4B) or more	N23 or N33 (24~30m)	75 (3B) or more	―	50 (2B) exclusive	―	DL
25	JF750 JF750S2	750	Three phase (Single phase 200V)	114	180	14.5/-/-	20 〈26〉［32］	24 〈30〉［36］	30	30	100 (4B) or more	N23 or N33 (30~35m)	75 (3B) or more	―	50 (2B) exclusive	―	DL

*1 Capacity indicates the value as following array; φ100 Jet/ φ75 Jet/ φ50 Jet/

NOTE) 25mm Suction pipe and Pressure pipe in φ75 Jet, 25mm pressure pipe in φ50 Jet. According to the combining Jet, prepare different dia. joint (32 x 25)

*2 Jet set N20~N23 have built-in Foot valve.

Also, use Jet set N30~N33 in case the well water level drops under Jet part. (It is not capable of drainage in the pipe, because of foot valve without lever.)

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Unit conversion calculator

NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.

Capacity: Q

U.S.GPM → m³/min
m³/min → U.S.GPM
→

Total head: H

feet → m
m → feet
→

For deep well 1100 & 1500W

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Convert to [U.S.GPM, ft.]

深井戸用

small water amount stop rate: 10L/min, accumulator volume: 2L

Discharge bore	Model	Motor	Power source	Suction height	H	Q	operation characteristics, Starting head	operation characteristics, Operation head	Connection suction pipe	Connection pressure pipe	Exclusive jet set No.*	CAD Download
mm	―	W	V	m	m	L/min	m	m	mm	mm	―	―
32	JF1100 JF1100S2	1100	Three phase (Single phase 200V)	12	32	52	20〈26〉［32］	24〈30〉［36］	30	30	N20 or N30 (6~12m)	DL
32	JF1100 JF1100S2	1100	Three phase (Single phase 200V)	18	38	45	20〈26〉［32］	24〈30〉［36］	30	30	N20 or N30 (12~18m)	DL
32	JF1100 JF1100S2	1100	Three phase (Single phase 200V)	24	44	35	20〈26〉［32］	24〈30〉［36］	30	30	N24 or N34 (18~24m)	DL
32	JF1500	1500	Three phase 200V	12	36	52	24〈30〉［36］	28〈34〉［40］	30	30	N20 or N30 (6~12m)	DL
32	JF1500	1500	Three phase 200V	18	42	50	24〈30〉［36］	28〈34〉［40］	30	30	N20 or N30 (12~18m)	DL
32	JF1500	1500	Three phase 200V	24	48	35	24〈30〉［36］	28〈34〉［40］	30	30	N24 or N34 (18~24m)	DL

*Operation characteristics enclosed in < > shows the value when Fine sensor set at M, and [ ] shows the value when Fine sensor set at H. H is default.

*2 Jet set N20 & N23 have built-in Foot valve.

Also, use Jet set N30 or N33 in case the well water level drops under Jet part. (It is not capable of drainage in the pipe, because of foot valve without lever.)

Discharge bore	Model	Motor	Power source	Suction height	H	Q	operation characteristics, Starting head	operation characteristics, Operation head	Connection suction pipe	Connection pressure pipe	Exclusive jet set No.*	CAD Download
mm	―	W	V	ft.	ft.	U.S.GPM	ft.	ft.	mm	mm	―	―
32	JF1100 JF1100S2	1100	Three phase (Single phase 200V)	39	104	13	20〈26〉［32］	24〈30〉［36］	30	30	N20 or N30 (6~12m)	DL
32	JF1100 JF1100S2	1100	Three phase (Single phase 200V)	59	124	11	20〈26〉［32］	24〈30〉［36］	30	30	N20 or N30 (12~18m)	DL
32	JF1100 JF1100S2	1100	Three phase (Single phase 200V)	78	144	9	20〈26〉［32］	24〈30〉［36］	30	30	N24 or N34 (18~24m)	DL
32	JF1500	1500	Three phase 200V	39	118	13	24〈30〉［36］	28〈34〉［40］	30	30	N20 or N30 (6~12m)	DL
32	JF1500	1500	Three phase 200V	59	137	13	24〈30〉［36］	28〈34〉［40］	30	30	N20 or N30 (12~18m)	DL
32	JF1500	1500	Three phase 200V	78	157	9	24〈30〉［36］	28〈34〉［40］	30	30	N24 or N34 (18~24m)	DL

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Unit conversion calculator

NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.

Capacity: Q

U.S.GPM → m³/min
m³/min → U.S.GPM
→

Total head: H

feet → m
m → feet
→

For shallow well (in case total suction head: -7m) 250~750W

Discharge head(m)

Capacity(L/min)

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Convert to [U.S.GPM, ft.]

For shallow well, small water amount stop rate: 4L/min

Discharge bore	Suction bore	Model	Motor	Power source	H	Q	operation characteristics, Starting head	operation characteristics, Operation head	Volume of accumulator	for shallow well Jet set No.	CAD Download
mm	mm	―	W	V	m	L/min	m	m	L	―	―
25	25	JF250S	250	Single phase 100V	21	28	14 ［20］	18 ［24］	1	A01	DL
25	32	JF400S	400	Single phase 100V	24	43	17<23>[29]	21<27>[33]	1	A02	DL
25	32	JF400S2	400	Single phase 200V	24	43	17<23>[29]	21<27>[33]	1	A02	DL
25	32	JF400T	400	Three phase 200V	24	43	17<23>[29]	21<27>[33]	1	A02	DL
25	32	JF750S2	750	Single phase 200V	27	65	20<26>[32]	24<30>[36]	1	A03	DL
25	32	JF750	750	Three phase 200V	27	65	20<26>[32]	24<30>[36]	1	A03	DL

When combining with reservoir, default pressure setting (M) is recommended.

Discharge bore	Suction bore	Model	Motor	Power source	H	Q	operation characteristics, Starting head	operation characteristics, Operation head	Volume of accumulator	for shallow well Jet set No.	CAD Download
mm	mm	―	W	V	ft.	U.S.GPM	ft.	ft.	L	―	―
25	25	JF250S	250	Single phase 100V	68	7	14 ［20］	18 ［24］	1	A01	DL
25	32	JF400S	400	Single phase 100V	78	11	17<23>[29]	21<27>[33]	1	A02	DL
25	32	JF400S2	400	Single phase 200V	78	11	17<23>[29]	21<27>[33]	1	A02	DL
25	32	JF400T	400	Three phase 200V	78	11	17<23>[29]	21<27>[33]	1	A02	DL
25	32	JF750S2	750	Single phase 200V	88	17	20<26>[32]	24<30>[36]	1	A03	DL
25	32	JF750	750	Three phase 200V	88	17	20<26>[32]	24<30>[36]	1	A03	DL

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Unit conversion calculator

NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.

Capacity: Q

U.S.GPM → m³/min
m³/min → U.S.GPM
→

Total head: H

feet → m
m → feet
→

For reservoir (in case total suction head: -1m) 250~750W

Discharge head(m)

Capacity(L/min)

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Convert to [U.S.GPM, ft.]

For reservoir, small water amount stop rate: 4L/min

Discharge bore	Suction bore	Operation method	Model	Motor	Power source	H	Q	operation characteristics, Starting head	operation characteristics, Operation head	Volume of accumulator	for reservoir Jet set No.	CAD Download	CAD Download	CAD Download	CAD Download	CAD Download	CAD Download
mm	mm	―	―	W	V	m	L/min	m	m	L	―	with TAB-50	with TAB-50 (mounter)	with TAK4-50	with TAK-50 (mounter)	with TAK4-100A	with TAK-100 (mounter)
25	25	Individual	JF250S	250	Single phase 100V	21	28	14 ［20］	18 ［24］	1	A01	DL	DL	DL	DL	DL	DL
25	32	Individual	JF400S	400	Single phase 100V	24	43	17<23>[29]	21<27>[33]	1	A02	DL	DL	DL	DL	DL	DL
25	32	Individual	JF400S2	400	Single phase 200V	24	43	17<23>[29]	21<27>[33]	1	A02	DL	DL	DL	DL	DL	DL
25	32	Individual	JF400T	400	Three phase 200V	24	43	17<23>[29]	21<27>[33]	1	A02	DL	DL	DL	DL	DL	DL
25	32	Individual	JF750S2	750	Single phase 200V	27	65	20<26>[32]	24<30>[36]	1	A03	DL	DL	DL	DL	DL	DL
25	32	Individual	JF750	750	Three phase 200V	27	65	20<26>[32]	24<30>[36]	1	A03	DL	DL	DL	DL	DL	DL

When combining with reservoir, default pressure setting (M) is recommended.

Discharge bore	Suction bore	Operation method	Model	Motor	Power source	H	Q	operation characteristics, Starting head	operation characteristics, Operation head	Volume of accumulator	for reservoir Jet set No.	CAD Download	CAD Download	CAD Download	CAD Download	CAD Download	CAD Download
mm	mm	―	―	W	V	ft.	U.S.GPM	ft.	ft.	L	―	with TAB-50	with TAB-50 (mounter)	with TAK4-50	with TAK-50 (mounter)	with TAK4-100A	with TAK-100 (mounter)
25	25	Individual	JF250S	250	Single phase 100V	68	7	14 ［20］	18 ［24］	1	A01	DL	DL	DL	DL	DL	DL
25	32	Individual	JF400S	400	Single phase 100V	78	11	17<23>[29]	21<27>[33]	1	A02	DL	DL	DL	DL	DL	DL
25	32	Individual	JF400S2	400	Single phase 200V	78	11	17<23>[29]	21<27>[33]	1	A02	DL	DL	DL	DL	DL	DL
25	32	Individual	JF400T	400	Three phase 200V	78	11	17<23>[29]	21<27>[33]	1	A02	DL	DL	DL	DL	DL	DL
25	32	Individual	JF750S2	750	Single phase 200V	88	17	20<26>[32]	24<30>[36]	1	A03	DL	DL	DL	DL	DL	DL
25	32	Individual	JF750	750	Three phase 200V	88	17	20<26>[32]	24<30>[36]	1	A03	DL	DL	DL	DL	DL	DL

Discharge bore	Suction bore	Model	Motor	Power source	H	Q	operation characteristics, Starting head	operation characteristics, Operation head	Volume of accumulator	for shallow well Jet set No.	CAD Download
mm	mm	―	W	V	ft.	U.S.GPM	ft.	ft.	L	―	―
32	40	JF1100	1100	Three phase 200V	88	31	20 26［32］	24<30>[36]	2	A04	DL
32	40	JF1100S2	1100	Single phase 200V	88	31	20 26［32］	24<30>[36]	2	A04	DL
32	40	JF1500	1500	Three phase 200V	101	36	24<30>[36]	28<34>[40]	2	A04	DL

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Unit conversion calculator

NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.

Capacity: Q

U.S.GPM → m³/min
m³/min → U.S.GPM
→

Total head: H

feet → m
m → feet
→

For reservoir (in case total suction head: -3m [actual suction head: within -1m]) 1100 & 1500W

Discharge head(m)

Capacity(L/min)

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Convert to [U.S.GPM, ft.]

For reservoir, small water amount stop rate: 10L/min

Discharge bore	Suction bore	Model	Motor	Power source	H	Q	operation characteristics, Starting head	operation characteristics, Operation head	Volume of accumulator	for reservoir Jet set No.
mm	mm	―	W	V	m	L/min	m	m	L	―
32	40	JF1100	1100	Three phase 200V	27	160	20 26［32］	24<30>[36]	2	A05
32	40	JF1100S2	1100	Single phase 200V	27	160	20 26［32］	24<30>[36]	2	A05
32	40	JF1500	1500	Three phase 200V	31	180	24<30>[36]	28<34>[40]	2	A05

*Operation characteristics enclosed in < > shows the value when Fine sensor set at M, and [ ] shows the value when Fine sensor set at H.

When combining with reservoir, default pressure setting (M) is recommended.

Discharge bore	Suction bore	Model	Motor	Power source	H	Q	operation characteristics, Starting head	operation characteristics, Operation head	Volume of accumulator	for reservoir Jet set No.
mm	mm	―	W	V	ft.	U.S.GPM	ft.	ft.	L	―
32	40	JF1100	1100	Three phase 200V	88	42	20 26［32］	24<30>[36]	2	A05
32	40	JF1100S2	1100	Single phase 200V	88	42	20 26［32］	24<30>[36]	2	A05
32	40	JF1500	1500	Three phase 200V	101	47	24<30>[36]	28<34>[40]	2	A05

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Unit conversion calculator

NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.

Capacity: Q

U.S.GPM → m³/min
m³/min → U.S.GPM
→

Total head: H

feet → m
m → feet
→

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

50Hz

Convert to [U.S.GPM, ft.]

Capacity for low flow stop: 4L/min

Discharge bore	Suction bore	Operation method	Model	Motor	Power source	H	Q	operation characteristics, Starting head	operation characteristics, Operation head	Operation sound	CAD Download	CAD Download	CAD Download
mm	mm	―	―	W	V	m	L/min	m	m	dB(A)	―	TAK4-100C付	TAK4-100C付（架台付）
25	25	Alternate	JF250SH-A	250	単相 100	21	28	14 ［20］	18 ［24］	45	DL	DL	DL
32	32	Alternate	JF400SH-A	400	単相 100	24	60	17 ［23］	21 ［27］	45	DL	DL	DL
32	32	Alternate	JF400S2H-A	400	単相 200	24	60	17 ［23］	21 ［27］	45	DL	DL	DL
32	32	Alternate	JF400TH-A	400	三相 200	24	60	17 ［23］	21 ［27］	45	DL	DL	DL
32	32	Alternate	JF750H-A	750	三相 200	27	88	20<26>[32]	24<30>[36]	51	DL	DL	DL
32	32	Alternate	JF750S2H-A	750	単相 200	27	88	20<26>[32]	24<30>[36]	51	DL	DL	DL
32	25	Alternate & Parallel	JF250SH-P	250X2	単相 100	21	56	14 ［20］	18 ［24］	48	DL	DL	DL
40	32	Alternate & Parallel	JF400SH-P	400X2	単相 100	24	120	17 ［23］	21 ［27］	48	DL	DL	DL
40	32	Alternate & Parallel	JF400S2H-P	400X2	単相 200	24	120	17 ［23］	21 ［27］	48	DL	DL	DL
40	32	Alternate & Parallel	JF400TH-P	400X2	三相 200	24	120	17 ［23］	21 ［27］	48	DL	DL	DL
40	32	Alternate & Parallel	JF750H-P	750X2	三相 200	27	176	20<26>[32]	24<30>[36]	54	DL	DL	DL
40	32	Alternate & Parallel	JF750S2H-P	750X2	単相 200	27	176	20<26>[32]	24<30>[36]	54	DL	DL	DL

*Operation characteristics enclosed in < > shows the value when Fine sensor set at M, and [ ] shows the value when Fine sensor set at H. Default setting of 250W & 400W model are H, and 750W model is M.

When using for well (in -7m suction height), use with L setting. If use with the other settings, pump may not stop.

JF

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

Unit conversion calculator

Capacity: Q

Total head: H

(in case using φ100 jet) For deep well 250~750W

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

For deep well, small water amount stop rate: 4L/min, accumulator volume: 1L

For deep well, small water amount stop rate: 4L/min, accumulator volume: 1L

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

Unit conversion calculator

Capacity: Q

Total head: H

For deep well 1100 & 1500W

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

深井戸用

深井戸用

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

Unit conversion calculator

Capacity: Q

Total head: H

For shallow well (in case total suction head: -7m) 250~750W

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

For shallow well, small water amount stop rate: 4L/min

For shallow well, small water amount stop rate: 4L/min

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

Unit conversion calculator

Capacity: Q

Total head: H

For reservoir (in case total suction head: -1m) 250~750W

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

For reservoir, small water amount stop rate: 4L/min

For reservoir, small water amount stop rate: 4L/min

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

Unit conversion calculator

Capacity: Q

Total head: H

For shallow well (in case total suction head: -6m [actual suction head: within -4m]) 1100 & 1500W

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

For shallow well, small water amount stop rate: 10L/min

For shallow well, small water amount stop rate: 10L/min

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

Unit conversion calculator

Capacity: Q

Total head: H

For reservoir (in case total suction head: -3m [actual suction head: within -1m]) 1100 & 1500W

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

For reservoir, small water amount stop rate: 10L/min

For reservoir, small water amount stop rate: 10L/min

Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.

Unit conversion calculator

Capacity: Q

Total head: H

Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.