NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.
| Bore | Ref. | Model | Motor | Specifications | Max. back pressure | CAD Download |
|---|---|---|---|---|---|---|
| mm | ― | ― | kW | ― | MPa | ― |
| 150X125 | 1 | GFK1506G4ME11 | 11 | *1 | 0.69 | DL |
| 150X125 | 2 | GFK1506G4ME15 | 15 | *1 | 0.69 | DL |
| 150X125 | 3 | GFK1506G4ME18 | 18.5 | *1 | 0.69 | DL |
| 150X125 | 4 | GFL1506G4ME15 | 15 | *1 | 0.69 | DL |
| 150X125 | 5 | GFL1506G4ME18 | 18.5 | *1 | 0.69 | DL |
| 150X125 | 6 | GFL1506G4ME22 | 22 | *1 | 0.69 | DL |
| 150X125 | 7 | GFL1506G4ME30 | 30 | *1 | 0.69 | DL |
| 150X125 | 8 | GFM1506G4ME30 | 30 | *1 | 0.69 | DL |
| 150X125 | 9 | GFM1506G4ME37 | 37 | *1 | 0.69 | DL |
| 150X125 | 10 | GFM1506G4ME45 | 45 | *1 | 0.69 | DL |
| 150X125 | 11 | GFM1506G4ME55 | 55 | *1 | 0.69 | DL |
| 150X125 | 12 | GFO1506G4ME45 | 45 | *1 | 0.49 | DL |
| 150X125 | 13 | GFO1506G4ME55 | 55 | *1 | 0.49 | DL |
| 150X125 | 14 | GFO1506G4ME75 | 75 | *1 | 0.49 | DL |
| 150X125 | 15 | GFO1506G4ME90 | 90 | *1 | 0.49 | DL |
| 200X150 | 16 | GFL2006G4ME37 | 37 | *1 | 0.69 | DL |
| 200X150 | 17 | GFL2006G4ME45 | 45 | *1 | 0.69 | DL |
| 200X150 | 18 | GFL2006G4ME55 | 55 | *1 | 0.69 | DL |
| 200X150 | 19 | GFM2006G4ME55 | 55 | *1 | 0.69 | DL |
| 200X150 | 20 | GFM2006G4ME75 | 75 | *1 | 0.69 | DL |
| 200X150 | 21 | GFM2006G4ME90 | 90 | *1 | 0.69 | DL |
| 200X150 | 22 | GFM2006G4ME110 | 110 | *1 | 0.69 | DL |
| 200X150 | 23 | GFO2006G4ME90 | 90 | *1 | 0.39 | DL |
| 200X150 | 24 | GFO2006G4ME110 | 110 | *1 | 0.39 | DL |
| 200X150 | 25 | GFO2006G4ME132 | 132 | *1 | 0.39 | DL |
| 200X150 | 26 | GFO2006G4ME160 | 160 | *1 | 0.39 | DL |
*1 Impeller dimension may vary according to the specification. When inquiring, please tell us specification.
Suction condition should be with back pressure (0.1MPa or more). In case using for suction lift up or without back pressure, special specification is required.
Also, in the case of back pressure exceeding more than 0.5MPa, GD type is recommended.