Standard spec
- Control method
- Control method: Water supply with constant discharge pressure with inverter.
- Installation location
- Installation location: Indoor / Outdoor (pump: under water)
- Application liquid
- Application liquid: Clean water 0~25°C (No freezing) (sand contents 50mg/L or less)
- Pump
- Pump: Deep well submersible pump (60Hz three phase)
- Materials
- Impeller: Resin
Shaft: UF2, UF2T: SUS304, UFS2: Stainless cast steel (304)
Suction casing: Stainless cast steel (304)
Discharge casing: Stainless cast steel (304)
Stage casing: SUS304 + Resin
- Motor
- Motor: Canned type submersible motor
- Max. submersing depth
- Max. submersing depth: 50m (900W, 1100W: 70m)
- Power source
- Power source: Single phase
Standard Accessories
Deep well submersible pump
Submersible cable: 450W: 4-1.25[[mm2]]x35<17>m, 600W: 4-12.5[[mm2]]x40<17>m, 600W(UFH): 4-12.5[[mm2]]x55m, 900W: 4-1.25[[mm]]x55<23>, 1100W: 4-1.25[[mm2]]x65<29>m *value enclosed in <> shows the case of UFL2
Rope for hanging: 450W: 34m, 600W: 39m, 900W: 54m, 1100W: 64m
Vinyl tape: 19mm x10m: for fixing Submersible cable
Automatic operation unit: 2m power cable
Standard accessory: Well cover (100mm well), Ring (for combination of well cover + Chloride vinyl pipe)
Standard accessory: Earth rod & 2 pcs of clamp
Optional Accessories
Lid seat
Noise filter
Return valve
Submersible pump check valve