NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.
SFR(W) in case clean water (0~45°C) SFRH(W) in case hot water (40~90°C)
Bore | Model | Motor | Power source | H | Standard pump up capacity | Operation head L*1 | Operation head M*1 | Operation head H*1 | Mass | Accumulator charged pressure | Operation sound | CAD Download |
---|---|---|---|---|---|---|---|---|---|---|---|---|
mm | ― | W | V | m | L/min | m | m | m | kg | MPa | dB(A) | ― |
13 | SFRH150S | 150 | Single phase 100V | 15 | 12 | 15 | 21 | 27 | 4.7 | 0.09 | 38*2 | DL |
20 | SFRHW150S | 150 | Single phase 100V | 15 | 12 | 15 | 21 | 27 | 4.7 | 0.09 | 38*2 | DL |
13 | SFR150S | 150 | Single phase 100V | 15 | 18 | 15 | 21 | 27 | 4.7 | 0.09 | 38*2 | DL |
20 | SFRW150S | 150 | Single phase 100V | 15 | 18 | 15 | 21 | 27 | 4.7 | 0.09 | 38*2 | DL |
― | ― | ― | ― | Required back pressure (dynamic water pressure) | Required back pressure (dynamic water pressure) | 12m or more | 6m or more | 12m or more | ― | ― | ― | ― |
*1 Please inquire about the pump up capacity by various conditions of back pressure.
*2 Average in the specification
NOTE) Above back pressure is required for using each operating pressure.
Starting pump head = Operation head -4m
Fine sensor is set at L as default.
Use Steel pipe or heat resistant pipe for SFRH(W).
VP pipe is not available, since it may get broken.