Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.
Total head(m)
Capacity(L/min)
Total head shows the value which is subtracted by pressure loss in the pump unit exclude back flow preventer loss.
Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.
60Hz
Capacity for low flow stop: 10L/min
20 | Alternate | 1 | NDP2-20A0.4SAG | 0.4 | Single phase 100V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | ― | DL |
20 | Alternate | 2 | NDP2-20A0.4S2AG | 0.4 | Single phase 200V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | ― | DL |
20 | Alternate | 3 | NDP2-20A0.4TAG | 0.4 | Three phase 200V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | 86.4 | DL |
20 | Alternate | 4 | NDP2-20A0.75S2AG | 0.75 | Single phase 200V | 60 | 38 | 30 | 27~38 | 0.2 | 33~35 | ― | DL |
20 | Alternate | 5 | NDP2-20A0.75AG | 0.75 | Three phase 200V | 60 | 38 | 30 | 27~38 | 0.2 | 33~37 | 88.1 | DL |
25 | Alternate | 6 | NDP2-25A0.4SAG | 0.4 | Single phase 100V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | ― | DL |
25 | Alternate | 7 | NDP2-25A0.4S2AG | 0.4 | Single phase 200V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | ― | DL |
25 | Alternate | 8 | NDP2-25A0.4TAG | 0.4 | Three phase 200V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | 86.4 | DL |
25 | Alternate | 9 | NDP2-25A0.75S2AG | 0.75 | Single phase 200V | 65 | 38 | 30 | 27~38 | 0.2 | 33~37 | ― | DL |
25 | Alternate | 10 | NDP2-25A0.75AG | 0.75 | Three phase 200V | 65 | 38 | 30 | 27~38 | 0.2 | 33~37 | 88.1 | DL |
25 | Alternate | 11 | NDP2-25A1.1S2AG | 1.1 | Single phase 200V | 62 | 56 | 46 | 41~56 | 0.25 | 37~40 | ― | DL |
25 | Alternate | 12 | NDP2-25A1.1AG | 1.1 | Three phase 200V | 62 | 56 | 46 | 41~56 | 0.25 | 37~40 | 88.6 | DL |
NOTE1) If planning to use a device with rapid change of flow rate such as a flash valve, consult us.
NOTE 2) If obliged to install the booster pump at the long distance from water main, please consult us.
* Operation sound is the value from zero discharge to the standard specification.
Capacity for low flow stop: 10L/min
20 | Alternate | 1 | NDP2-20A0.4SAG | 0.4 | Single phase 100V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | ― | DL |
20 | Alternate | 2 | NDP2-20A0.4S2AG | 0.4 | Single phase 200V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | ― | DL |
20 | Alternate | 3 | NDP2-20A0.4TAG | 0.4 | Three phase 200V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | 86.4 | DL |
20 | Alternate | 4 | NDP2-20A0.75S2AG | 0.75 | Single phase 200V | 15852 | 124 | 7926 | 27~38 | 0.2 | 33~35 | ― | DL |
20 | Alternate | 5 | NDP2-20A0.75AG | 0.75 | Three phase 200V | 15852 | 124 | 7926 | 27~38 | 0.2 | 33~37 | 88.1 | DL |
25 | Alternate | 6 | NDP2-25A0.4SAG | 0.4 | Single phase 100V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | ― | DL |
25 | Alternate | 7 | NDP2-25A0.4S2AG | 0.4 | Single phase 200V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | ― | DL |
25 | Alternate | 8 | NDP2-25A0.4TAG | 0.4 | Three phase 200V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | 86.4 | DL |
25 | Alternate | 9 | NDP2-25A0.75S2AG | 0.75 | Single phase 200V | 17173 | 124 | 7926 | 27~38 | 0.2 | 33~37 | ― | DL |
25 | Alternate | 10 | NDP2-25A0.75AG | 0.75 | Three phase 200V | 17173 | 124 | 7926 | 27~38 | 0.2 | 33~37 | 88.1 | DL |
25 | Alternate | 11 | NDP2-25A1.1S2AG | 1.1 | Single phase 200V | 16380 | 183 | 12153 | 41~56 | 0.25 | 37~40 | ― | DL |
25 | Alternate | 12 | NDP2-25A1.1AG | 1.1 | Three phase 200V | 16380 | 183 | 12153 | 41~56 | 0.25 | 37~40 | 88.6 | DL |
NOTE1) If planning to use a device with rapid change of flow rate such as a flash valve, consult us.
NOTE 2) If obliged to install the booster pump at the long distance from water main, please consult us.
* Operation sound is the value from zero discharge to the standard specification.
Selection chartNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.
Total head(m)
Capacity(m3/min)
Total head shows the value which is subtracted by pressure loss in the pump unit exclude back flow preventer loss.
Specificiation tableNOTEActual performance may slightly differ from the values in table and chart. Values in table show standard characteristics.
60Hz
Capacity for low flow stop: 10L/min
20 | Alternate | 1 | NDP2-20A0.4SAG | 0.4 | Single phase 100V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | ― | DL |
20 | Alternate | 2 | NDP2-20A0.4S2AG | 0.4 | Single phase 200V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | ― | DL |
20 | Alternate | 3 | NDP2-20A0.4TAG | 0.4 | Three phase 200V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | 86.4 | DL |
20 | Alternate | 4 | NDP2-20A0.75S2AG | 0.75 | Single phase 200V | 60 | 38 | 30 | 27~38 | 0.2 | 33~35 | ― | DL |
20 | Alternate | 5 | NDP2-20A0.75AG | 0.75 | Three phase 200V | 60 | 38 | 30 | 27~38 | 0.2 | 33~37 | 88.1 | DL |
25 | Alternate | 6 | NDP2-25A0.4SAG | 0.4 | Single phase 100V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | ― | DL |
25 | Alternate | 7 | NDP2-25A0.4S2AG | 0.4 | Single phase 200V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | ― | DL |
25 | Alternate | 8 | NDP2-25A0.4TAG | 0.4 | Three phase 200V | 45 | 25 | 18 | 18~25 | 0.12 | 33~35 | 86.4 | DL |
25 | Alternate | 9 | NDP2-25A0.75S2AG | 0.75 | Single phase 200V | 65 | 38 | 30 | 27~38 | 0.2 | 33~37 | ― | DL |
25 | Alternate | 10 | NDP2-25A0.75AG | 0.75 | Three phase 200V | 65 | 38 | 30 | 27~38 | 0.2 | 33~37 | 88.1 | DL |
25 | Alternate | 11 | NDP2-25A1.1S2AG | 1.1 | Single phase 200V | 62 | 56 | 46 | 41~56 | 0.25 | 37~40 | ― | DL |
25 | Alternate | 12 | NDP2-25A1.1AG | 1.1 | Three phase 200V | 62 | 56 | 46 | 41~56 | 0.25 | 37~40 | 88.6 | DL |
NOTE1) If planning to use a device with rapid change of flow rate such as a flash valve, consult us.
NOTE 2) If obliged to install the booster pump at the long distance from water main, please consult us.
* Operation sound is the value from zero discharge to the standard specification.
Capacity for low flow stop: 10L/min
20 | Alternate | 1 | NDP2-20A0.4SAG | 0.4 | Single phase 100V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | ― | DL |
20 | Alternate | 2 | NDP2-20A0.4S2AG | 0.4 | Single phase 200V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | ― | DL |
20 | Alternate | 3 | NDP2-20A0.4TAG | 0.4 | Three phase 200V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | 86.4 | DL |
20 | Alternate | 4 | NDP2-20A0.75S2AG | 0.75 | Single phase 200V | 15852 | 124 | 7926 | 27~38 | 0.2 | 33~35 | ― | DL |
20 | Alternate | 5 | NDP2-20A0.75AG | 0.75 | Three phase 200V | 15852 | 124 | 7926 | 27~38 | 0.2 | 33~37 | 88.1 | DL |
25 | Alternate | 6 | NDP2-25A0.4SAG | 0.4 | Single phase 100V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | ― | DL |
25 | Alternate | 7 | NDP2-25A0.4S2AG | 0.4 | Single phase 200V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | ― | DL |
25 | Alternate | 8 | NDP2-25A0.4TAG | 0.4 | Three phase 200V | 11889 | 82 | 4755 | 18~25 | 0.12 | 33~35 | 86.4 | DL |
25 | Alternate | 9 | NDP2-25A0.75S2AG | 0.75 | Single phase 200V | 17173 | 124 | 7926 | 27~38 | 0.2 | 33~37 | ― | DL |
25 | Alternate | 10 | NDP2-25A0.75AG | 0.75 | Three phase 200V | 17173 | 124 | 7926 | 27~38 | 0.2 | 33~37 | 88.1 | DL |
25 | Alternate | 11 | NDP2-25A1.1S2AG | 1.1 | Single phase 200V | 16380 | 183 | 12153 | 41~56 | 0.25 | 37~40 | ― | DL |
25 | Alternate | 12 | NDP2-25A1.1AG | 1.1 | Three phase 200V | 16380 | 183 | 12153 | 41~56 | 0.25 | 37~40 | 88.6 | DL |
NOTE1) If planning to use a device with rapid change of flow rate such as a flash valve, consult us.
NOTE 2) If obliged to install the booster pump at the long distance from water main, please consult us.
* Operation sound is the value from zero discharge to the standard specification.