page top

Kawamoto Pump Mfg. Co., Ltd.

Direct connecting

KFED


Application

  • Direct connection to water main for booster

Feature

  • By pump section's high efficiency design and IE4 equivalent PM motor, the KFE type realized top class total efficiency in the industry.
  • Enhanced control panel improves operability, and adds new functions such like Eco-drive, Remote monitoring (necessary optional accessory).
  • Redesign figure and materials brings downsizing and weight down.
  • Quiet & energy saving: Water supply with less pressure fluctuation and low operation noise by 2 VFDs equipped with microcomputer for water supply.
  • Less impact to water main: Soft start and stop pump minimizes impact to the water main.
  • Clean water supply without red discoloration: Stainless steel, Resin, and Bronze materials are adopted for portion contacting water such like Pump, Valve and Pipes, thus, free from concern about rusting and red discoloration of water.
  • Water level control of Overhead tank: Combination with level relay (standard accessory) makes it usable to direct connection boosting for overhead tank & gravity water supply system.
  • Supply terminal for heater with switch: Labor-saving for heater installation with supply terminal for heater as standard terminal.
  • Inspection work switch: Inspection work switch showing the states of "during maintenance work" improve maintenance work efficiency.
  • Direct boosting function: In case power failure and pump stop, city water main pressure pushes water to pump secondary side through bypass.
  • Fully equipped component: As well as Low sound TEFC motor and DC reactor, cumulative operation timer and counter is equipped as standard.
  • Pump stop in small capacity: When water demand is small such like midnight, pump will stop. for equalizing pump load in each, when pump stop in small capacity, automatically carry out alternate operation.
  • Temperature detection: In case of temperature rising of water in the pump, it stops pump for protection.

Standard spec

Control method
Control method: Constant estimated terminal pressure water supply with Valuable Frequency Drive
Operation method
Operation method: Alternate operation
Installation location
Installation location: Indoor (ambient temperature: 0~)40°C, Humidity: 90%RH or less, Altitude: 1000m or less
Liquid
Fluid quality: Clean water
Fluid temperature: [0~40°C (No freezing)
Materials
Impeller: Resin or Stainless cast steel (304)
Casing: Stainless cast steel (304)
Shaft: SUS304
Motor
Type: Permanent Magnet motor (TEFC indoor)
Poles: 4 poles (3.7kW or less), 8 poles (5.5kW or less)
Power source: Single phase (1.1kW), Three phase
Efficiency: IE5 equivalent (1.1~3.7kW), IE4 equivalent (0.75, 5.5, 7.5kW)
Back pressure
Back pressure: 0.75MPa - Boosting set head MPa
Back flow prevention device
Back flow prevention device: Pressure reduction type
Paint color (Munsell No.)
Paint color (Munsell No.): Control panel: Beige (5Y7/1), Accumulator: Gray (10Y5.5/0.5), Base: Gray (2.5PB5.1/0.8)
Control panel
Major devices: Inverter for individual pump, Earth leakage breaker, Noise filter, Arrester
Normal indication: Power, Operation (individual), Operation current & frequency selective indicator (individual), Dis. & Suc. head (selective indicator in control panel), Cumulative operation hours, Cumulative operation counts
Abnormal indication: No.1 & No.2 pump individual fault indicator (pump and inverter are mixed), Earth leakage, Suction pressure drop, During inspection work, Abnormal water level of overhead tank.
External signal (voltage-free: always OPEN contactor): Operation (individual pump), Fault (individual pump), Suction pressure drop, During inspection work, Abnormal water level of overhead tank

Standard Accessories

Pump: 2 units pump made of Stainless steel

Control panel: ECSH5 type

Flow sensor

Pressure transmitter: 1 pc for Suc. and 1 pc for Dis.

Check valve: 3 pcs Hummer-less valve made of stainless

Sluice valve: made of bronze: 4 pcs

Accumulator: PTD3-1 type

Suction pipe

Discharge pipe

Others: Base


Optional Accessories

Vibration proof bed
Connecting pipe for direction change of Suc. & Dis.
Anti-freezing heater
Vibration proof joint
Pipe silencer
Accumulator
Foundation bolt
Remote monitoring device