NOTE
This is the only calculator for unit conversion. Graph will be not affected by this conversion.
| Bore | Ref. | Model | Motor | Motor | Specifications | Max. back pressure | CAD Download |
|---|---|---|---|---|---|---|---|
| mm | ― | ― | kW | Poles | ― | MPa | ― |
| 80Ｘ65 | 4 | GDK805M4ME1.5 | 1.5 | 4 | *1 | 1.2 | DL |
| 80Ｘ65 | 5 | GDK805M4ME2.2 | 2.2 | 4 | *1 | 1.2 | DL |
| 80Ｘ65 | 6 | GDL805M4ME2.2 | 2.2 | 4 | *1 | 1.1 | DL |
| 80Ｘ65 | 7 | GDL805M4ME3.7 | 3.7 | 4 | *1 | 1.1 | DL |
| 80Ｘ65 | 8 | GDM805M4ME3.7 | 3.7 | 4 | *1 | 0.98 | DL |
| 80Ｘ65 | 9 | GDM805M4ME5.5 | 5.5 | 4 | *1 | 0.98 | DL |
| 80Ｘ65 | 10 | GDM805M4ME7.5 | 7.5 | 4 | *1 | 0.98 | DL |
| 100Ｘ80 | 13 | GDK1005M4ME2.2 | 2.2 | 4 | *1 | 1.2 | DL |
| 100Ｘ80 | 14 | GDK1005M4ME3.7 | 3.7 | 4 | *1 | 1.2 | DL |
| 100Ｘ80 | 15 | GDL1005M4ME3.7 | 3.7 | 4 | *1 | 1.1 | DL |
| 100Ｘ80 | 16 | GDL1005M4ME5.5 | 5.5 | 4 | *1 | 1.1 | DL |
| 100Ｘ80 | 17 | GDM1005M4ME5.5 | 5.5 | 4 | *1 | 1 | DL |
| 100Ｘ80 | 18 | GDM1005M4ME7.5 | 7.5 | 4 | *1 | 1 | DL |
| 100Ｘ80 | 19 | GDM1005M4ME11 | 11 | 4 | *1 | 1 | DL |
| 125Ｘ100 | 20 | GDK1255M4ME3.7 | 3.7 | 4 | *1 | 1.2 | DL |
| 125Ｘ100 | 21 | GDK1255M4ME5.5 | 5.5 | 4 | *1 | 1.2 | DL |
| 125Ｘ100 | 22 | GDL1255M4ME5.5 | 5.5 | 4 | *1 | 1.1 | DL |
| 125Ｘ100 | 23 | GDL1255M4ME7.5 | 7.5 | 4 | *1 | 1.1 | DL |
| 125Ｘ100 | 24 | GDL1255M4ME11 | 11 | 4 | *1 | 1.1 | DL |
| 125Ｘ100 | 25 | GDM1255M4ME11 | 11 | 4 | *1 | 0.96 | DL |
| 125Ｘ100 | 26 | GDM1255M4ME15 | 15 | 4 | *1 | 0.96 | DL |
| 125Ｘ100 | 27 | GDM1255M4ME18 | 18.5 | 4 | *1 | 0.96 | DL |
| 125Ｘ100 | 28 | GDO1255M4ME15 | 15 | 4 | *1 | 0.69 | DL |
| 125Ｘ100 | 29 | GDO1255M4ME18 | 18.5 | 4 | *1 | 0.69 | DL |
| 125Ｘ100 | 30 | GDO1255M4ME22 | 22 | 4 | *1 | 0.69 | DL |
| 125Ｘ100 | 31 | GDO1255M4ME30 | 30 | 4 | *1 | 0.69 | DL |
| 150Ｘ125 | 32 | GDK1505M4ME7.5 | 7.5 | 4 | *1 | 1.2 | DL |
| 150Ｘ125 | 33 | GDK1505M4ME11 | 11 | 4 | *1 | 1.2 | DL |
| 150Ｘ125 | 34 | GDL1505M4ME11 | 11 | 4 | *1 | 1.1 | DL |
| 150Ｘ125 | 35 | GDL1505M4ME15 | 15 | 4 | *1 | 1.1 | DL |
| 150Ｘ125 | 36 | GDL1505M4ME18 | 18.5 | 4 | *1 | 1.1 | DL |
| 150Ｘ125 | 37 | GDM1505M4ME15 | 15 | 4 | *1 | 0.91 | DL |
| 150Ｘ125 | 38 | GDM1505M4ME18 | 18.5 | 4 | *1 | 0.91 | DL |
| 150Ｘ125 | 39 | GDM1505M4ME22 | 22 | 4 | *1 | 0.91 | DL |
| 150Ｘ125 | 40 | GDM1505M4ME30 | 30 | 4 | *1 | 0.91 | DL |
| 150Ｘ125 | 41 | GDM1505M4ME37 | 37 | 4 | *1 | 0.91 | DL |
| 150Ｘ125 | 42 | GDO1505M4ME30 | 30 | 4 | *1 | 0.49 | DL |
| 150Ｘ125 | 43 | GDO1505M4ME37 | 37 | 4 | *1 | 0.49 | DL |
| 150Ｘ125 | 44 | GDO1505M4ME45 | 45 | 4 | *1 | 0.49 | DL |
| 150Ｘ125 | 45 | GDO1505M4ME55 | 55 | 4 | *1 | 0.49 | DL |
| 150Ｘ125 | 46 | GDO1505M4ME75 | 75 | 4 | *1 | 0.49 | DL |
| 200Ｘ150 | 47 | GDL2005M4ME22 | 22 | 4 | *1 | 1.1 | DL |
| 200Ｘ150 | 48 | GDL2005M4ME30 | 30 | 4 | *1 | 1.1 | DL |
| 200Ｘ150 | 49 | GDL2005M4ME37 | 37 | 4 | *1 | 1.1 | DL |
| 200Ｘ150 | 50 | GDM2005M4ME37 | 37 | 4 | *1 | 0.93 | DL |
| 200Ｘ150 | 51 | GDM2005M4ME45 | 45 | 4 | *1 | 0.93 | DL |
| 200Ｘ150 | 52 | GDM2005M4ME55 | 55 | 4 | *1 | 0.93 | DL |
| 200Ｘ150 | 53 | GDO2005M4ME55 | 55 | 4 | *1 | 0.75 | DL |
| 200Ｘ150 | 54 | GDO2005M4ME75 | 75 | 4 | *1 | 0.75 | DL |
| 200Ｘ150 | 55 | GDO2005M4ME90 | 90 | 4 | *1 | 0.75 | DL |
*1 Impeller dimension may vary according to the specification. When inquiring, please tell us specification. In some case max. back pressure may exceed the listed value at right depending on the specification, but GDF type is also available. Please inquire about detail by each case.