GD-2M

• Feature
• Model list
• Structure
• Document
• Video

• SELECT
•  | Lv.1
•  | Lv.2

Parts listNOTEThis is the representative drawing. It may slightly differ from actual goods depending on the model name.

Lv.1

Ref.	Parts	Material	Q'ty
1	Casing	(Ductile Cast iron)	1
2	Bolt	SWRM10	12
3	Cover with shaft		1
4	Key	SUS403	1
5	Impeller	Aluminum bronze	1
6	Plane washer	SUS304	1
7	Spring washer	SUS304	1
8	Nut	SUS304	1
9	O-ring	NBR-70-1	1
11	Supporter	Steel	1
12	Bolt	SWRM10	1
13	Plug	SWCH10K	1
14	Plug	SWCH10K	1
15	Plug	SWCH10K	1
16	Plug	SWCH10K	1
17	Base	Cast iron	1
18	Spring washer	SWRH57A	4
19	Bolt	SWRM10	4
20	Bolt	SWRM10	2

Ref.	Parts	Material	Q'ty
21	Key	S45C	1
22	Coupling	Cast iron	1
23	Cup point set screw	SCM435	1
24	Motor		1
25	Coupling	(Cast iron)	1
26	Cup point set screw	SCM435	1
28	Spring washer	SWRH57A	4
29	Bolt	SWRM10	4
30-1	Square shim	SUS301	1
30-2	Square shim	Galvanized steel	1
30-3	Square shim	Galvanized steel	1
30-4	Square shim	Galvanized steel	1
31	Coupling guard	Steel plate	1
34	Bolt with built in washer	(SWRM10)	2
37	Bolt	SUS304	2
38	Caution label	(Paper)	1
39	Nameplate	A1100P-H24	1
40	Drive screw	SUS304	4
201	Adhesive		1

Lv.2

Ref.	Parts	Material	Q'ty
1	Shaft	SUS420J2Q	1
2	Ball-bearing	SUJ2	2
3	Bearing box	Cast iron	1
4	Bearing cover	Cast iron	1
5	Bolt	SWRM10	4
6	Wave washer	S65CM	1
7	Deflector	EPDM	1
8	Deflector	EPDM	1
9	Bearing cover	Cast iron	1
10	Bolt	SWRM10	4

Ref.	Parts	Material	Q'ty
11	Deflector	EPDM	1
12	Mechanical seal cover	Bronze	1
13	Mechanical seal		1
14	O-ring	NBR-70-1	1
15	Sleeve	SUS304	1
16	Casing cover	(Ductile Cast iron)	1
17	Double-end stud	SUS304	4
18	Nut	SUS304	4
19	Bolt	SWRM10	4