1st: Manual type (Floor mount)
2nd: Automatic type
3rd: Automatic alternate type
4th: Manual type (Pedestal support type)
- Seawater intake aid
- Industrial water lift up aid
- Automatic operation is available.
- installation labor is savable.
- Less installation space due to all-in-one unit.
- Adopting Stainless cast steel (316) for Casing, and Bronze for Impeller prevent rust.
- Less parts crush because of no lubrication parts inside pump.
- Air including vapor or waterdrop is also available.
- Suction bore
- Suction bore: 25A: Rhombic flange
- Installation location
- Installation location: Indoor
- Ambient environment
- Ambient environment: Ambient temperature 0~40°C, Humidity 90%RH or less
- Handling gas
- Handling gas: Gas temperature 0~40°C
- Impeller: Bronze
Casing (Stage casing, casing cover): Stainless cast steel (316)
- Type: TEFC outdoor
Power source: Three phase
- Operation frequency (Hz)
- Suction air volume ([[m3/min]] 50/60Hz)
- Max. vacuum pressure (kPa) 50/60Hz
- Automatic unit
- Water level gage: Built-in strainer for electrode protection, Body, flange: Stainless cast steel (316), Electrode: Titanium
Control panel: ECP-0.75-01type Protective function: Earth leakage, Over load
- Reservoir (effective volume)
- Material, Volume: PE resin (effective vol: 50L), TAB-5 type
Dimension (mm): 420(W) X 740(L) X 490(H)
Water level gage
Check valve (for back from prevention during pump off)
Ball valve (for water drop prevention during maintenance of water level gauge)