Standard spec
- Application liquid
- Fluid quality: Clean water: pH5.8~8.6, Seawater: pH7.8~8.2 Chloride ion concentration 19,000mg/L or less Sand contents: 1,000mg/L or less
Fluid temperature: 0 to 60 °C (no freezing)
- Materials
- Impeller: Resin
Shaft: SUS316
Casing: Resin (METTON[[r]])
Base: Cast iron (polyester powder coating)
- Motor
- Type: TEFC outdoor
Power source: Single phase or Three phase
Speed: 50Hz: 3,000 min-1, 60Hz: 3,600 min-1
Efficiency: Premium efficiency in 0.75kW or more
- Installation location
- Installation location: Indoor/Outdoor
- Structure
- Impeller: Semi-open
Shaft sealing: Mechanical seal (ceramic x carbon in bore size 40mm model, SiC x carbon in the other model)
Bearing: Closed ball bearing
- Paint color (Munsell No.)
- Paint color (Munsell No.): Resin part: Black, Nylon coating part: White (N-9.5), Others: (2.5PB5.1/0.8)
Standard Accessories
Motor
Base
Valve socket: Two pcs (for suction)
thermostat: Automatic recovery type (exclude 40mm bore size model in GSP type) *Protects the nylon coating of the parts contacting liquid from abnormal temperature rises within the pump as a result of dry-run, etc. Use the pump in combination with an ECP type control panel (optional accessory).
Note: Always use valve socket to piping work as standard accessory. Do not twist steel pipe directly.
Optional Accessories
Control panel (ECO type)
Foundation bolt
Discharge flange set (stainless cast steel equivalent to 316)
Discharge flange set (PVC)